DIN is a DIN standard for electrical connectors that are widely used in rack based The standard has subsequently been upgraded to international standards IEC and EN DIN connectors are used in STEbus. DIN / IEC Connectors. Wiring accessories. The ERNI connector housing range together with the ERNI interface connector system offers optimum . Perforated rail/ for connector IEC (RatiopacPro/-air, PropacPro, CompacPro, EuropacPro).
||3 December 2011
|PDF File Size:
|ePub File Size:
||Free* [*Free Regsitration Required]
The free board connectors are provided either with solder or flat quick-connect terminations.
The part of the connector fitted to the board is provided with terminations suitable for printed boards in accordance with IEC using a grid of 2,54 mm 0,1 inas defined in IEC The connectors may have 16 or 32 columns, iecc means that the possible permutations allow 16, 32, 48, 64 or 96 contacts.
The rows and columns are on a 0.
DIN 41612 / IEC-60603-2 connectors
606032- A Profile of the European Connector Industry”. Related publications IEC The following test report forms are related: From Wikipedia, the free encyclopedia. They range from connectors with high contact density for low-voltage applications Styles B and C to 06603-2 for heavy currents and high voltages having fewer contacts Styles D, E, F, G and H.
Our prices are in Swiss francs CHF. Look inside Relevant for connector two-part connector frequency below 3 MHz printed board. Views Read Edit View history.
Flexible DIN / IEC connectors from ERNI for industry
DIN is a DIN standard for electrical connectors that are widely used in rack based electrical systems. They were also used by NuBus. The DIN specification identifies 3 different classes or “levels”; it’s more complicated than this, but, essentially: The standard describes connectors which may have one, two or three rows of contacts, which are labelled as rows a, b and c.
Preview Abstract IEC Municipal Services Standards Committee. The terminations of the fixed board 66003-2 are located in such a way as to be suitable for use with mother boards using ief grid of 2,54 mm 0,1 in as defined in IEC as well as for automating wiring techniques. Often the female DIN connectors have press fit contacts rather than solder pin contacts, to avoid thermal shock to the backplane.
All these connectors have the same fitting characteristics irrespective of their various utilization characteristics. Do you need a multi-user copy?
The headline performance of the connectors is a 2 amp per pin current carrying capacity, and volt working voltage. Retrieved from ” https: This page was last edited on 26 Januaryat It applies further to two-part connectors of Styles Q, R, S, T, U and V whose male contacts are fitted to the fixed board connectors and the female contacts to the free board connectors.
You can help Wikipedia by expanding it.
Both these figures may need to be de-rated according to safety requirements or environmental conditions. We accept all major credit cards American Express, Mastercard and VisaPayPal and bank transfers as form of payment. It also applies to Style M two-part connectors supplied in alternative versions having 2, 4 or 6 holes for fitting special contacts, for example coaxial, for high voltages or heavy currents see annex Bas well as 78, 60 or 42 normal contacts identical with those of style C.
HI-CON DIN 41612 (IEC 60603-2)
The fixed board connectors are provided either with solder, insulation displacement, wrapped connections or with screw terminals 606033-2 flat quick-connect terminations. Insertion and removal force are controlled, and three durability grades are available.
DIN standards Electrical signal connectors Electronics stubs.